Laptop Repair

How to Remove Battery from Hp Laptop

If you are using a laptop, then you might know that you have to replace your laptop battery eventually. The charging of your laptop over a long period of time makes the battery power to decrease over time.

However, it’s a good news that a laptop battery can be replaced. So, if you are asking “how to replace HP laptop battery replacement?” then you can try this below solutions. With the given steps, you will be able to perform the replacement more effectively and quickly. However, if you are uncomfortable doing the replacement yourself, then it is better to connect with a laptop repair service and consult an expert. 

Steps for HP Laptop Battery Replacement

In order to replace the battery in your HP laptop, you have to go through the following steps:

1. Buying a new battery for your HP laptop

Before doing anything with your old battery, first you have to buy a new battery. You have to ensure the model number of your laptop and buy the correct battery. Be very careful and avoid buying the wrong battery.

If you are wondering about the price of the battery, then you must know that it can vary on the age of your laptop. The older your laptop will be, the more difficult it will be to find a battery for it.   

2. Make a report for the battery on the Windows

Before you decide on an HP laptop battery removal, you must check the performance of your battery. The battery report has become easier on Windows. You can make the report by following the given steps:

1. Bring up the command prompt by clicking on the lower-left corner of the screen. 

2. Write “powercgg” and press “Enter”. 

3. After that, your battery status report will be saved. 

4. Then, click on the folder named “User” and you will be able to see report on your battery status.

This report will tell you about the performance of the battery earlier and a look at the last three cycles of charging. By reviewing this report, you have to determine whether the battery needs to be replaced or not.        

3. Disconnect the Power Source from your Laptop

Now, you have to disconnect your laptop from all the power connections. Also, power-down the laptop and remove the old battery. If you do not disconnect the power source, you have a chance of getting an electric shock, which can be very dangerous. 

4. Open the Laptop Back Panel by using a Screwdriver

Removal of the back panel is necessary for almost all the HP laptops. Hence, to remove the back panel, you will be needing a screwdriver with a Philips-head. Before you can access the battery, you will find some rubber feet on the back panel. But, the rubber feet will vary depending on the model of your HP laptop.

You have to use an opening tool made of plastic to remove the rubber. This will make your job easy and then you will be able to remove the screws. Use the screwdriver to open the panel and gently place it on the side. You may need to use the plastic tool to open the panel but be sure not to damage the internal components. 

5. HP Laptop Battery Removal

Now, use your screwdriver to open the screws which are holding the battery into the laptop. After removing the screws, you have to disconnect the cables which are connecting the battery to the laptop. These cables are very delicate, be sure not to damage them. Any damage will lead to other problems in the future.

Now, take the new battery out of its package and ensure that no plastic is attached to its body. To be extra careful, check that the battery is the one with is correct for your laptop model. An incompatible battery can lead to many problems in the future and can also damage your laptop. Now, put the battery in the battery slot properly. This is a very delicate process. Hence if you can also go to a local laptop repair center.  

6. Connect the Battery with the Laptop

Now, you have to connect the battery to the laptop. You have to connect your battery with the cables very carefully. Ensure that the battery is firmly placed. After that put all the rubber feet in their place and screw the back panel in its place.

7. Check the Battery Performance

To check its performance, you have to take a battery report. After setting up the battery, power up the laptop. See to it that everything is starting normally. Then, to check if your battery is performing ok, perform another battery report. If you find the report to be good, then you have successfully done the HP laptop battery replacement. 

Conclusion

So, by following the above steps, you will be able to successfully do a hp laptop battery replacement. But, if you are new in doing the process yourself, then you must contact to laptop repair service, and consult an expert. They will always help you in a better way on how to remove battery from hp laptop.

Teresa A. Adkins

Share
Published by
Teresa A. Adkins

Recent Posts

Carpenters in Dubai – Choose the Best one

Carpenters in Dubai are on the rise. The city is becoming a hub for global…

4 years ago

Lawyers in Dubai Provide Excellent Legal Services

For law firms or businesses in Dubai, the services of experienced and highly qualified lawyers…

4 years ago

7 Brilliant Idea that can Turn You into a Genius Homeowner

Home-based products can serve you in maintaining the well-being of your house. But, to become…

4 years ago

5 Ways to Distract Moles & Control Pests

Moles are very much difficult to eliminate if they settle down in your garden and…

4 years ago

Can You Handle all Your Home Repairs During Lockdown

In this COVID-19 situation, all of us are staying at home. People are also working…

4 years ago

Are You Willing To Hire a Handyman? Know What to Pay

A handyman performs a variety of tasks in your home. Those tasks include random activities…

4 years ago